System Requirements; Host Pc Requirements; Making A Backup Copy - Intermec JANUS JG2010 User Manual

System Requirements

You must have the following hardware/software components and network
information before installing your data collection network.

Host PC Requirements

You can use any type of PC (desktop, laptop, or notebook) as your host PC if it
meets the following minimum system requirements:

Making a Backup Copy

Intermec recommends that you make a backup copy of all the disks that ship in
your original JANUS 2.4 GHz Installation Utility kit. Place the original disks in
a safe place. Run the Installation Utility using the backup copy. You need to
provide:
To make a backup copy
1. Insert the disk in drive A of your host PC.
2. From a DOS prompt, type:
3. Follow the instructions on the screen to make your backup copy.
JANUS 2.4 GHz RF devices
JANUS 2.4 GHz Installation Utility kit
Optical adapter or communications dock (JG2010 or JG2020)
Null modem cable
Access points
IP addresses for each device, the default router address, and the subnet
mask, if this information will not be obtained from a BOOTP or RARP
server at boot time.
Hard disk with at least 14MB of disk space available
3.5-inch high-density drive A
Serial port
PC-DOS or MS-DOS v5.0 or above, Windows 3.1 (DOS prompt), or
Windows 95 (DOS prompt)
3.5-inch, high-density, formatted disks
diskcopy a: a:
Learning About the Installation Utility
1
1-7