Running Diagnostics From The Menu System - Intermec Trakker Antares 2410 System Manual

Running Diagnostics From the Menu System

Trakker Antares 2400 Family System Manual
39 AGaramond
nugget
Diagnostics Listed by Category (continued)
System
Diagnostic Test Description
Access Point (RF terminals only) Lists information about the
access point the RF terminal is communicating
with across the network.
Application Displays the application efficiency percentage to
Efficiency
help determine the impact that the application has
on the terminal's battery power.
Code Verify Determines if the terminal's firmware has been
overwritten.
Malloc Shows how memory is allocated and used by the
Application current application.
Information
Malloc Firmware Shows how memory is allocated and used in the
Information terminal firmware.
Serial Port Test Tests serial communications between the terminal
and the host computer or serial device.
Subsystem Lists the version of each major firmware subsystem
Versions loaded on the terminal.
Software
Diagnostic Test Description
Application Shows the current status of each application event
Events to help debug applications.
Clear Task Clears the Task Status counters so that you can
Profiles begin accumulating new task statistics for the Task
Status screen and the Application Efficiency screen.
Error Logger Lists any errors that the firmware did not expect.
Font Test Lists the double-byte font, if any, that is loaded in
the terminal.
Keypad Table Lists the number of the keypad table that is loaded
in the terminal.
Task Status Shows the task name, stack, the percentage of
time each subsystem has been running, and the
stack usage.
The TRAKKER Antares 2400 Menu System is a menu-driven application
that lets you configure the terminal, view system information, and run
diagnostics. You can access the TRAKKER Antares 2400 Menu System
and run diagnostics while running any application.
Chapter 4—Running Diagnostics
Page
Number
72
72
77
82
83
85
86
Page
Number
73
76
78
79
80
86
69