Using The Menu System To Configure The Terminal - Intermec Trakker Antares 2480 Quick Start Manual

d 39
nugget

Using the Menu System to Configure the Terminal

20
• Network Activate. Make sure that 2.4 GHz RF (OpenAir radio) or
802.11 DS (802.11b radio) appears in the Activate field. If you are
using the WTP network, you only need to configure this parameter.
• Controller IP Address (UDP Plus) or Host IP Address (TCP/IP).
• (TCP/IP or UDP Plus) Terminal IP Address. If you are using a
DHCP (Dynamic Host Configuration Protocol) server, you can leave
the default terminal IP address as 0.0.0.0 to enable the 248X as a
DHCP client.
• Domain (OpenAir radio).
• Security ID (OpenAir radio).
• Network Name (802.11b radio).
• WEP Encryption (Non-802.1x security).
• Network Port (TCP/IP).
• Default Router (Intermec Gateway or DCS 30X or host on different
subnetwork).
• Subnet Mask (Intermec Gateway or DCS 30X or host on different
subnetwork).
• User Name and Password (802.1x security option).
For more information about the network parameters, see the Trakker
Antares 2400 Family System Manual (P/N 071389).
6 If you are running a TE 2000 terminal emulation application, you
may need to change the configuration. For help, see "Choosing Your
TE 2000 Application" on page 21.
You use the TRAKKER Antares 2400 Menu System to set serial port or
network parameters on the 2480, 2481, 2485, or 2486.
To configure the terminal
1 Press ) ; 2 4 8 or
scan this bar code to access the
TRAKKER Antares 2400 Menu
System:
TRAKKER Antares 2400 Menu System
*..-.*
*..-.*
The Main Menu appears.
2 Choose the System Menu and press ;, and then select Set Time
and Date and press ; to set the current time and date. For help
in the menu system, press ¡.
Trakker Antares 248X Stationary Terminal Quick Start Guide
248XG.014