Error Displays - Clarion DXZ755MC Owner's Manual

10. ERROR DISPLAYS

If an error occurs, one of the following displays is displayed.
Take the measures described below to eliminate the problem.
Error Display
ERROR 2 A DISC is caught inside the CD deck and is
not ejected.
ERROR 3 A DISC cannot be played due to scratches,
etc.
ERROR 6 A DISC is loaded upside-down inside the
CD deck and cannot play.
ERROR 7 The format of the flash memory is damaged.
ERROR 8 There is a failure with the flash memory.
ERROR 9 An error during recording, scratch on the
disc, or error due to sound skips
ERROR 2 A DISC inside the CD changer is not loaded
properly.
ERROR 3 A DISC inside the CD changer cannot be
played due to scratches, etc.
ERROR 6 A DISC inside the CD changer cannot be
played because it is loaded upside-down.
ERROR 2 A DISC inside the DVD changer is not
loaded properly.
ERROR 3 A DISC cannot be played due to scratches,
etc.
ERROR 6 A DISC inside the DVD changer cannot be
played because it is loaded upside-down.
ERROR P Parental level error
ERROR R Region code error
If an error display other than the ones described above appears, press the reset button. If the problem
persists, turn off the power and consult Clarion dealer.
32
DXZ755MC
Cause Measure
This is a failure of CD deck's mechanism and
consult Clarion dealer.
Replace with a non-scratched disc.
Eject the disc then reload it properly.
Execute ALL ERASE on the flash memory,
and the problem is solved.
Turn POWER/ACC off and then turn it on
again, and the problem is solved.
If not solved, executed ALL ERASE on the
flash memory, and the problem is solved.
Turn POWER/ACC off and then turn it on
again, or eject the CD. The problem is
solved.
This is a failure of CD changer's mechanism
and consult Clarion dealer.
Replace with a non-scratched disc.
Eject the disc then reload it properly.
This is a failure of DVD mechanism and con-
sult Clarion dealer.
Retry or replace with a non-scratched disc.
Eject the disc then reload it properly
Set the correct Parental level.
Eject the disc and replace correct region
code disc.