Beeper Setup (6400, 5055, 59Xx, 17Xx, 11Xx, Ck30, Ck31); Key Click (6400, 5055, 59Xx, 17Xx, 11Xx) - Intermec CK30 Programmer's Manual

3) Beeper Setup (6400, 5055, 59XX, 17XX, 11XX, CK30, CK31)

™
TE 2000 5250 Terminal Emulation Programmer's Guide
Example
In this example, the toolbar has an "Exit" option, is set to "Session 1," dis-
plays the RSSI status, and is also set to "Session 2." Session 1" is definted
to have the session name "CFNK" and Session 2 shows the IP address
"136.179.84.175."
Exit
RSSI
Session 1 set
to session name
Note: Press Defaults to reset the toolbar to its default values.
The 3) Beeper Setup menus adjust the beeper tones for key clicks (presses)
and error conditions. For 17XX Terminals, 3) Beeper Select directs the au-
dio output to the internal buzzer or to a headset.
Beeper Setup
1) Key Click
2) Error Tone
3) Beeper select

1) Key Click (6400, 5055, 59XX, 17XX, 11XX)

Use 1) Key Click to adjust the frequency and length (duration) of the
sound made when you press a key.
—
Chapter 4 Using the Terminal Emulation Menus
Session 2 set
to IP address
1) Key Click is for
6400, 5055, 59XX, 17XX, 11XX
3) Beeper Select
is for 6400, 5055, 17XX, 11XX
161