Beeper Setup (6400, 5055, 59Xx, 17Xx, 11Xx, Ck30, Ck31) - Intermec CK30 Programmer's Manual

—
Chapter 4 Using the Terminal Emulation Menus

3) Beeper Setup (6400, 5055, 59XX, 17XX, 11XX, CK30, CK31)

144
Example
In this example, the toolbar has an "Exit" option, is set to "Session 1," dis-
plays the RSSI status, and is also set to "Session 2." Session 1" is definted
to have the session name "CFNK" and Session 2 shows the IP address
"136.179.84.175."
Exit
RSSI
Session 1 set
to session name
Note: Press Defaults to reset the toolbar to its default values.
The 3) Beeper Setup menus adjust the beeper tones for key clicks (presses)
and error conditions. For 17XX Terminals, 3) Beeper Select directs the au-
dio output to the internal buzzer or to a headset.
Beeper Setup
1) Key Click
2) Error Tone
3) Beeper select
TE 2000
Session 2 set
to IP address
™
3270 Terminal Emulation Programmer's Guide