700 Series, Ck30, Ck31, Cv60 Terminals; Disabling The Auto-Login Feature - Intermec CK30 Programmer's Manual

Disabling the Auto-Login Feature

™
TE 2000 5250 Terminal Emulation Programmer's Guide
2 Using PROGDUX.EXE from the flash files, load the NEW.HEX file
onto the terminal. Below is a sample command line using the 1780 Ter-
minal:
PROGDUX –e NEW178H0.HEX

700 Series, CK30, CK31, CV60 Terminals

This procedure requires that you have Microsoft ActiveSync installed on
your desktop and that you establish a remote connection to your terminal.
See the 3-paragraph note on the next page.
1 On the terminal, tap Start > ActiveSync > Sync.
2 From your desktop, access the Microsoft ActiveSync, then click Explore
to access the contents of the terminal via its "Mobile Device" directory
or folder. Browse to the appropriate location where files are to install.
3 Also from your desktop, select Start > Windows Explorer, then browse
for the files that are to be transferred to your terminal.
4 Drag those files from the desktop Windows Explorer to the ActiveSync
"Mobile Device" window.
5 From the terminal, tap Start > Programs > File Explorer, then browse
to the location where to place the files. If missing, then ensure all con-
nections and locations are accurate before attempting this procedure.
Note: Always store files such as the AUTOLOG.SCR, REMAP.CFG,
CONFIG.DAT (for TE 2000 application versions older than 8.00),
TE_SETTINGS.INI (for TE 2000 application versions 8.00 or greater),
CFGLIT.DAT, or other such files, in the directory where the TE 2000
executable is stored. This is the root directory on the CV60 Computer,
and is the "\CK_FFS" directory on the CK30 or CK31 Computer.
On 700 Series Computers, if a Secure Digital card is present, the
"\SDMMC Disk\TE2000" directory contains the executable if installed
from a CAB file. If there is no SecureDigital card, the next choice is the
Flash File Store. Finally, if neither is present, then the TE 2000 executable
is stored in the "\Program Files" directory.
These extra files are either in the directory with the executable, in the root
of the Secure Digital card if present or the Flash File Store if present, or at
the very root of the machine, which is the order of precedence. Thus, the
root directories are not the default — not the first choice. If the user
created a new one of these files and placed it at the root, and another file
of the same name existed somewhere else, higher in priority, then the
user's file is ignored. Thus, it is best to place it in the directory with the
TE 2000 executable file.
To disable auto-login, you may rename or delete the AUTOLOG.SCR
file. Renaming the file ensures that you can use the same auto-login script
file later by changing the name back to AUTOLOG.SCR. If you want to
enable a new script file, you can use the instructions in this section to re-
name a different script file to AUTOLOG.SCR.
—
Chapter 5 Customizing Your Configuration
187