Disabling The Auto-Login Feature; 2415, 2425, 2435A, 2455, 2475, 248X Terminals; 5020, 700 Series, Ck30, Ck31, Cv60 Terminals - Intermec CK30 Programmer's Manual

—
Chapter 5 Customizing Your Configuration

Disabling the Auto-Login Feature

170
On 700 Series Computers, if a Secure Digital card is present, the
"\SDMMC Disk\TE2000" directory contains the executable if installed
from a CAB file. If there is no SecureDigital card, the next choice is the
Flash File Store. Finally, if neither is present, then the TE 2000 executable
is stored in the "\Program Files" directory.
These extra files are either in the directory with the executable, in the root
of the Secure Digital card if present or the Flash File Store if present, or at
the very root of the machine, which is the order of precedence. Thus, the
root directories are not the default — not the first choice. If the user
created a new one of these files and placed it at the root, and another file
of the same name existed somewhere else, higher in priority, then the
user's file is ignored. Thus, it is best to place it in the directory with the
TE 2000 executable file.
To disable auto-login, you may rename or delete the AUTOLOG.SCR
file. Renaming the file ensures that you can use the same auto-login script
file later by changing the name back to AUTOLOG.SCR. If you want to
enable a new script file, you can use the instructions in this section to
rename a different script file to AUTOLOG.SCR.
Follow these procedures to disable (or delete) the auto-login script file.
The method depends on the type of terminal you are using.

2415, 2425, 2435A, 2455, 2475, 248X Terminals

1 Press the appropriate key sequence or scan the following bar code to ac-
cess the TRAKKER Antares
Enter Test and Service Mode
*../M.*
*..-.*
2 Choose System Menu and then choose File Manager.
3 Select drive C. Press Y or B to highlight AUTOLOG.SCR.
4 Press [FnL .] to delete the file or press [F7] to rename the file.
5 Exit the TRAKKER Antares 2400 Menu System to return to the cur-
rent session. Restart the TE 2000 application to use it without the auto-
login.
You can also rename the auto-login script file from your host. For help,
refer to your terminal's user manual.

5020, 700 Series, CK30, CK31, CV60 Terminals

Via your web browser, access the IP address at http://<IP address>,
double-click the File Manager desktop icon, select File, then press the
[Del] key to remove the auto-login feature.
For the terminal, using Microsoft ActiveSync, browse for the auto-login
file, right-click the file for a pop-up menu, then select Delete to remove
the file from the terminal.
TE 2000
R
2400 Menu System's Main Menu:
™
3270 Terminal Emulation Programmer's Guide