Table of Contents
Advertisement
en operation
a The display shows either the pro-
gramme duration or the "Ready in"
time.
a After the programme has ended,
the display shows: End or "0".
If "0" is displayed, the laundry is
2.
not spun. Press Start / Pause to
drain the water and to start the
Spin programme.
To remove the laundry without
3.
spinning, press Start / Pause after
approx. 1 minute. The programme
stops before spinning, the door
lock opens and the laundry can be
removed.
Note: If appears, the appliance cools
the laundry.
When goes out, the laundry has
cooled down.
14.7 Changing the activated
"Ready in" time
If you have set and activated a
"Ready in" time for a delayed pro-
gramme start, you can change the
"Ready in" time again before the pro-
gramme starts.
Requirements
¡ The programme is set.
→ "Setting a programme", Page 29
¡ The "Ready in" time is set and ac-
tivated.
→ "Buttons", Page 21
Press Start / Pause.
1.
The activated "Ready in" time is
paused.
Press Ready In repeatedly until the
2.
display indicates the desired
"Ready in" time.
Press Start / Pause.
3.
The changed "Ready in" time is ac-
tivated.
30
14.8 Soaking laundry
Note: No additional detergent is re-
quired. The washing solution is then
used for washing.
Start the programme.
1.
To pause the programme, after ap-
2.
prox. 10 minutes, press
Start / Pause.
To resume the programme, after
3.
the desired soaking time, press
Start / Pause.
14.9 Adding laundry
Press Start / Pause.
1.
During the washing cycle, the ap-
pliance pauses.
During the drying cycle, the appli-
ance checks whether it is possible
to add laundry.
appears, it is not pos-
Note: If
sible to add laundry.
When
goes out, it is possible to
add laundry.
Open the appliance door.
2.
Add or remove laundry.
3.
Close the appliance door.
4.
Press Start / Pause.
5.
14.10 Cancelling the pro-
gramme
Press Start / Pause.
1.
Open the appliance door.
2.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the Rinse programme.
– If the water level is high, start
the Spin programme or select a
suitable programme for draining.
→ "Programmes", Page 24
Advertisement
Table of Contents
