Table of Contents
Advertisement
Installation loca-
tion
Kitchen unit
Against a wall
4.4 Removing the transit
bolts
The appliance is secured for trans-
portation using transit bolts on the
rear of the appliance.
Note: Keep the transit bolt screws
and the sleeves in a safe place for fu-
ture transport → Page 45.
Pull the hoses out of the holders.
1.
Requirements
Only install the
appliance under-
neath a continu-
ous worktop that
is securely con-
nected to adja-
cent cabinets.
Required niche
width: 60 cm.
Do not trap the
hoses between
the wall and the
appliance.
Installation and connection en
Unscrew
and remove
2.
screws for the 4 transit bolts with a
WAF 13 wrench.
Remove the power cable from the
3.
holder.
Remove the 4 sleeves.
4.
all
13
Advertisement
Table of Contents
