Table of Contents
Advertisement
en Installation and connection
Put on the 4 cover caps.
5.
Press down on the 4 cover caps.
6.
4.5 Connecting the appliance
Connecting the water inlet hose
Connect the water inlet hose.
1.
14
Connect the water inlet hose to a
2.
tap (26.4 mm = 3/4").
Open the water tap carefully and
3.
check that the connection points
are tight.
Water outlet connection types
This information is intended to help
you to connect this appliance to the
water outlet.
ATTENTION!
When draining, the water outlet hose
is subject to water pressure and may
come loose from the installed con-
nection point.
Secure the water outlet hose
▶
against unintentional loosening.
Note: Observe the draining heights.
The draining heights are: minimum:
60 cm, maximum: 100 cm
Siphon
Sink
Secure the con-
nection point with
a (24–40 mm)
hose clamp.
Fix and secure
the water outlet
hose with an el-
bow
→ Page 28.
Advertisement
Table of Contents
