Toshiba RAV-HM301MUT-E Service Manual page 71

CODE No. required at least
DN Contents
10 Type
11 Indoor unit capacity
12 Line address
13 Indoor unit address
14 Group address
E0 Destination
Step3 After writing down all setting data, push [ON/OFF] button to return to the normal stop status.
(It takes approx. 1 min until the remote controller operation is available again.)
1. The Code No. for the Indoor unit type and Indoor unit capacity are
required to set the rotation number setting of the fan.
2. If the system/indoor/group addresses are different from those
before replacement, the auto-address setting mode starts and the
manual resetting may be required again.
(when the multiple units group operation including twin system.)
– 71 –