Music Catcher Ii (Recording/Erasing) Operations - Clarion DFZ667MC Owner's Manual

MUSIC CATCHER II (Recording/Erasing) Operations

Notes on recording using MUSIC CATCHER II
• MUSIC CATCHER II provides recording
feature at 4 times speed for audio CDs or CD-
Rs.
• For CD-RWs, only double-speed recording is
available.
• Recording using MUSIC CATCHER II is
available only for audio CDs (including CD-R,
CD-RW). MP3/WMA discs cannot be recorded;
sounds from the AUX input jack or the radio
cannot be recorded, too.
• When recording finishes, MUSIC CATCHER II
automatically rewinds to the beginning of the
track currently being played back. This is
caused by the difference between the
recording speed and the playing speed; that
does not mean mechanical failure.
• The sound quality after the recording may differ
from that you heard during the recording. This
is caused by that MUSIC CATCHER II uses its
memory (just recorded) as the sound source
for the playback during recording; that does not
mean mechanical failure.
• When you start recording during a CD or a
track playback, MUSIC CATCHER II
automatically rewinds to the beginning of the
CD or the track, then starts recording.
• The sound quality while MUSIC CATCHER II
playing back may differ from that of audio CD.
If you are not satisfied with the sound quality,
switch the recording mode to SHQ, or HQ; and
retry recording.
• In recording using MUSIC CATCHER II, some
amount of silent time is created between the
tracks.
Remaining capacity of the memory
Refer to the subsection "Remaining capacity of
the memory" (page 25) in the section "Adjust
Mode".
• When recording the rest of the tracks on a CD
with some tracks already have been recorded,
MUSIC CATCHER II records that rest of the
tracks to the same folder previously used.
• Folder and file names are added automatically
during recording. These folder and file names
cannot be changed (The file names correspond
to the track Nos. on the CD).
Example:
Folder name : FLD00001
Track name : TRACK 01
Set a "USER TITLE" for a folder name using
the entering titles function. Also, delete the
"USER TITLE" previously entered, and then
MUSIC CATCHER II renames that folder to the
same name automatically added during
recording. For details on how to set a title, refer
to the subsection "Entering titles" (page 23) in
the section "Common Operations".
• If the disc is not recordable, "NO REC DSC"
shows on the display.
• If the disc contains some tracks previously
recorded, "INCLUDED" shows on the display.
• If there is no empty folder available, "FOLDER
FULL" shows on the display.
• When the memory capacity is used up,
"MEMORY FULL" shows on the display and
recording is canceled.
• Recording cannot be performed during SCN,
RPT, and RDM. In such cases, "BUSY" shows
on the display.
• The [h], [R], [F], [BND] and [SCN/PRT/
RDM] buttons are invalid during recording.
When these buttons are pressed, "INVALID"
shows on the display.
Setting a recording mode
Refer to the subsection "Setting a recording
mode" (page 25) in the section "Adjust Mode".
• "SHQ" : about 248 minutes
• "HQ" : about 331 minutes
• "STD" : about 497 minutes
• "LP" : about 663 minutes
21