Siemens Gigaset USB Stick 108 Manual page 23

Configuring the Gigaset USB Stick 108
Activating security options
In the Configuration – Security tab, the default security mode is Disabled. You can use
this to register on all wireless networks which do not use encryption for data transfer.
If you would like to register on a wireless network where the registration is checked
and data transfer is encrypted, you must activate the security options of your
Gigaset USB Stick 108.
ì
Select the security mode in the Security pop-up window:
– WPA-PSK (see page 23)
– WEP (see page 24)
WPA-PSK offers greater protection for your network than WEP. You should
therefore use WPA-PSK for registration if all components in your network support
this.
The following are available for networks with authentication servers:
– WPA
If WPA is used for authentication in your network, you must select the parameters
according to the settings for the network. Contact your administrator.
A window opens to configure the mode.
22