Vfo Frequency Scanning Limit; Turn On/Off Fm Radio; Ctcss/Dcs Setup - Alinco DJ-CRX2 Instruction Manual

BASIC OPERATIONS

VFO frequency scanning limit

Setup the frequency of L1 channel, U1 channel, L2 channel and U2 channel will realize VFO frequency
scanning border limited. When VFO frequency between L1 and U1 or L2 and U2, radio will scan
between them. When VFO frequency exceed L1 and U1 or L2 and U2, radio will scan whole frequency.
Turn On/ Off FM Radio
Under standby state, press
then press key, LCD displays "FM ON" and current FM radio frequency, FM
1
radio function is on.
When FM radio is on, press
Or press key, the top left corner of LCD displays "
A
turn off FM radio and return to transceiver state.
When FM radio is on, Re-start transceiver, FM radio function will still on.
You can listen to the FM radio in the background (any incoming call will silence the FM radio) by pressing
the [PTT] button or
#

CTCSS/DCS Setup

Under standby state, press
press key, LCD displays "CT" icon, it means current channel add CTCSS
2
TONE
signal function. Repeat above operation, LCD displays "DCS" icon, it means
current channel add DCS signal function. Repeat above operation, "DCS" icon
disappears, current channel without CTCSS/DCS signal.
key, the top left corner of LCD displays "
A
key, LCD displays "FM OFF", FM radio is mute.
key.
key, the top left corner of LCD displays "
A
" icon,
" icon, press key to
1
" icon,
16