Table of Contents
Advertisement
USING THE CART
RE-INSTALLING DRAWERS
1. Re-install the drawers by extending their guides as shown in Fig. 28.
2. While holding the drawer parallel to the cabinet, carefully align & engage the ends of the glides. Slide the drawer
about 3 cm so that the glides are supporting the back of the drawer (Fig. 29).
3. While holding the drawer up by the handle, pull the glides from the drawer cavity out over the drawer glide until
they click (Fig. 30).
4. As you push the drawers in, you will encounter moderate resistance. Continue to push the drawer all the way in
to complete the engagement process. The drawer will now glide smoothly in & out with light effort (Fig. 31).
Fig. 28
Drawer Cavity Glide
Fig. 30
Drawer Glide properly Engaged.
12
Fig. 29
Fig. 31
Advertisement
Table of Contents
