Table of Contents
Advertisement
First time use
If using the Warming Drawer for the first time, three LEDs in temperature controls are
illuminated at start up.
1
2
3
During a cycle
The drawer can be opened at any point during operation. This will pause the programme
and the indicator light will flash until the drawer is closed again. To cancel a cycle, touch
at any time. To turn off the drawer, touch
Standby mode
After 12 hours of continuous use, the drawer automatically switches to standby mode.
The
button is dimmed when in standby mode. Touch
Do not leave the Warming Drawer unattended for long periods of continuous operation.
USING YOUR WARMING DRAWER
Open the drawer and touch
drawer ON.
Select the desired heating function. If no
function is selected, the drawer will start at
default setting.
Close the drawer. The indicator light will flash
if the drawer is not closed.
At the end of a cycle:
A tone will sound and the
Use caution when unloading the drawer, the
heated glass base and its contents will be hot.
for two to three seconds and release.
button to resume drawer use.
to switch the
symbol will dim.
11
Advertisement
Table of Contents
