SAFETY AND WARNINGS WARNING! WARNING! Electric Shock Hazard Tip Hazard Failure to follow this advice may result in This product may tip. Keep children away and electrical shock or death. take care. Failure to follow this advice may result in injury. •...
SAFETY AND WARNINGS WARMING DRAWER MODELS READ AND SAVE THIS GUIDE WARNING! To reduce the risk of fire, injury to persons or damage when using the appliance, follow the important safety guides listed below. Read all the instructions before using the appliance. Installation Please make this information available to the person installing the product.
UNPACK YOUR PRODUCT ELECTRICAL SPECIFICATIONS Remove the warming drawer and accessories box from the packaging. Recycle the materials All electrical work must be done by a qualified electrician, or a Fisher & Paykel trained and that can be reused. Dispose packaging materials in accordance with local regulations on waste supported service technician.
PARTS SUPPLIED TOOLS REQUIRED WARMING DRAWER WARMING DRAWER MINIMAL WB24SDEB2 & WB30SDEB1 CONTEMPORARY WB24SDEX2 & WB30SDEX1 PROFESSIONAL WB30SPEX1 INTEGRATED WB30SDEI1 INTEGRATED W30SDEI SERVICE & WARRANTY SERVICE ET GARANTIE ΣΈΡΒΙΣ ΚΑΙ ΕΓΓΎΗΣΗ SERVIZIO E GARANZIA SERVICE & GARANTIE HUOLTO JA TAKUU SERVICE OG GARANTI 保...
PRODUCT DIMENSIONS - 30" INTEGRATED MODELS WB30SDEI PRODUCT DIMENSIONS A Overall height 10 11/16 B Overall width 28 7/16 C Overall depth* 22 3/16 D Height of chassis 10 11/16 E Width of chassis 27 13/16 F Height of door frame 10 1/2 G Depth of door frame** 11/16...
CABINETRY DIMENSIONS - 30" INTEGRATED MODELS FLUSH INSTALL custom panel PROFILE WB30SDEI CABINETRY DIMENSIONS INCHES A Minimum inside height of cavity 10 3/4 B Minimum inside width of cavity min 28 9/16 - max 28 3/4 min 725 - max 730 C Minimum inside depth of cavity 22 1/2 D Overall width of cabinetry...
FRONT PANEL SPECIFICATIONS INSTALLATION OPTIONS Ensure the back and sides of the panel and cabinetry around the drawer are completely sealed STANDALONE INSTALLATION with a waterproof vapour barrier (ie polyurethane) to prevent damage to the panel. This installation is suitable for Minimal, Contemporary & Professional Warming drawers. A fixed shelf must be installed above the warming drawer.
Page 12
INSTALLATION OPTIONS COMBINED WITH SINGLE OVEN COMBINED WITH COMPANION PRODUCT This combination is suitable for 24" and 30" Warming Drawers that can fully support This combination is suitable for 24" and 30" Warming Drawers that can fully support 24" and 30" Fisher & Paykel wall ovens, respectively. 24"...
Page 13
INSTALLATION OPTIONS COMBINED WITH DOUBLE OVEN COMBINED WITH SINGLE OVEN & COMPANION PRODUCT This combination is suitable for 30" Warming Drawers. A shelf is required above the oven to This combination is suitable for 30" Warming Drawers that can fully support a support the 30"...
INSTALLING THE DRAWER cabinet bracket chassis flange Check the base of the cabinetry using a leveler or ruler. bracket cover Ensure the cabinetry is square Secure the bracket cover and and base is level. chassis flange to the cabinet brackets with T15 machine screws (6x).
Page 15
INSTALLING THE DRAWER Drill pilot holes into the custom panel through the screw holes in the door frame. Ensure the custom panel is Be careful not to drill through the correctly aligned and centered panel. before fixing to the tape as this can only be done once.
ADJUSTING THE DEPTH ADJUSTING THE HEIGHT The depth of the front panel of the warming drawer can be adjusted to align with the The front panel of the warming drawer can be adjusted vertically to align with the surrounding surrounding cabinetry. cabinetry.
INSTALLER CHECKLIST FP WARMER DRAWER INTERFACE LOGIC_V1 PRODUCT OFF USER PRESSES ON/OFF BUTTON IMPORTANT! Read all installation instructions in this manual to see if the unit has been correctly installed. ALL OT Ensure that installation has been completed correctly before use. TEMPER MEDIUM Ensure that:...