Using Your Warming Drawer - Fisher & Paykel WB24SDB1-SET User Manual

Hide thumbs Also See for WB24SDB1-SET:
Table of Contents

Advertisement

First time use
If using the Warming Drawer for the first time, three LEDs in temperature controls are
illuminated at start up.
1
2
3
4
During a cycle
The drawer can be opened at any point during operation. This will pause the programme
and the indicator light will flash until the drawer is closed again. To cancel a cycle, touch
at any time. To turn off the drawer, touch
Standby mode
After 12 hours of continuous use, the drawer automatically switches to standby mode.
The
button is dimmed when in standby mode. Touch
Do not leave the Warming Drawer unattended for long periods of continuous operation.
10

USING YOUR WARMING DRAWER

For push-to-open models, touch the
centre-front of the drawer to open.
Do not force the drawer open.
Touch the
button to switch the drawer ON.
Select the desired heating function. If no
function is selected, the drawer will start at
default setting.
Press the centre of the door to close the
drawer. The indicator light will flash if the
drawer is not closed.
At the end of a cycle:
A tone will sound and the
Use caution when unloading the drawer, the
heated glass base and its contents will be hot.
for two to three seconds and release.
button to resume drawer use.
symbol will dim.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wb24smb1-setWb30sdb1-setWb30sdx1-set

Table of Contents