Setup And Installation; Installation Site - Eizo CuratOR EX5841 Instructions For Use Manual

Setup and installation

4.1 Installation site

4 Setup and installation
CAUTION
Changes to device
Do not make any mechanical or electric changes to the device. Otherwise the device war-
ranty becomes invalid.
The manufacturer is not liable for changes made to the device.
4.1 Installation site
NOTICE
The power switch and connections must be accessible at all times
When installing and connecting the monitor, ensure that the power switch and the connec-
tions are accessible at all times.
NOTICE
Condensation
If the device is brought into a warm environment from a cold one, condensation may form
in the device. This could result in a short circuit when switching on the device, damaging it.
• Wait until the condensed water has evaporated, including that inside the device, before
you switch it on. This can take several hours.
NOTICE
Overheating
Overheating can lead to monitor failure. Make sure that the following conditions are met
with the monitor in operation:
• The minimum distance from the back and side of the monitor to the wall is 10 cm, and
at least 15 cm from other devices.
• The ambient temperature is in a range of +5° C - +40° C.
NOTICE
Dusty environment
The monitor is intended for use in the clean environment of medical diagnostics. In dust
environments, dust can penetrate into the monitor.
In the worst case, deposits are possible which become evident as dark spots in a white
picture and result in deterioration of the luminance.
• Protect the monitor from dust, for example through appropriate construction measures
at the installation site.
14
CuratOR EX5841
Instructions for Use, 04/2020