InFocus LP930 User Manual page 34

Brightness + or - (remote only)
Adjusting the brightness lightens or darkens the image.
To darken the image, press -
•
To lighten the image, press +.
•
Freeze (remote only)
The button halts, or "freezes" the projected image. Use this
freeze
button to freeze a frame of video (the video continues to run but
the projected image is frozen). You can also freeze an image from
a computer source on the screen, allowing you to perform other
operations on the computer without the audience seeing them.
Press again when you want the image to return to normal.
freeze
Laser (remote only)
The laser button activates a laser beam that can be used as a
pointing device. To use the laser, press and hold the laser button.
The laser goes off when the button is released.
Menu
Press to open the on-screen menus. Press
menu
close the menus. When you close the menus, the projector saves
any changes you made. For more information about the on-
screen menus, see page 27.
Power
The button turns the projector on and off. When you plug
power
the projector in, the Power LED lights. When you press the
button, the LED blinks green, then turns solid green and the lamp
turns on.
When you press the
lamp turns off and the LED blinks orange while the fans continue
to run to cool the projector. After the projector is cooled, the pro-
jector turns off and the LED lights solid green.
.
button while the projector is on, the
power
again to
menu
power
25