2 Output Operation; Power Delivery - Hobart 6921 Series Operation And Maintenance Manual

OM-2040 / Operation and Maintenance Manual
90D20 / Generator Sets
5. No. 2 Output Operation
When a machine is equipped with a second output option, each output may be operated independently
of the other. Each output has the same rating as the generator when operated alone; however, when
operated simultaneously, the total load of both circuits should not exceed the rated capacity of the
generator.
a. Power Delivery
Output No. 2 on the dual output machines is operated in the same manner as output No. 1 (see
para. 2. E) using the duplicate contactor switch shown in Figure 5. When the No. 2 contactor is
closed, the contactor CLOSED light beside that switch will glow green.
NOTE: Make sure that No. 2 TEST BANK switch (1-1; Fig. 18) is positioned properly (see para. 2. D. (1) (b)
for proper position).
Chapter 1-3
Page 8
1. Selector Switch
2. Pushbutton Switch
3. Positive Test Jack (Red)
4. Negative Test Jack (Black)
Test Box Operating Controls
Figure 3
Test Receptacle
Connector (with
protective cap
installed)
Figure 4
February 28/94 Revised