Table of Contents
Advertisement
Check you have done everything you need to before you start your first wash:
…
Has the basepacker been removed?
…
Is the drain hose threaded through the hose guide 'U bend' (with no more than 20
mm extended) and hooked into your standpipe or tub, or attached to a spigot?
…
Is the hot hose connected to the hot valve marked 'H'?
…
Is the cold hose connected to the cold valve marked 'C'?
…
Have the taps been turned on?
…
Is the washer correctly levelled, feet are extended and cabinet corners are clear of
the floor?
…
Has the power cord been connected to an appropriate power supply and the power
turned on?
…
Have you performed the installation test cycle (see previous page)?
CleanSmart™ capacity
CleanSmart™ offers a very generous 10 kg capacity. The list below outlines what is included
in a 10 kg wash load (in accordance with AS / NZS 2040.1:2005).
WASH LOAD - 10 KG
Sheets (double)
Bath towels
Tablecloths
Shirts
T-Shirts
Pillowcases
Shorts
Washcloths
Handkerchiefs
The above load composition is indicative only. We recommend for everyday use that you
separate out your sheets and towels and wash them separately on the
cycle.
12
BEFORE YOUR FIRST WASH
QUANTITY
4
8
3
4
6
6
6
4
2
and
SHEETS
TOWELS
Advertisement
Table of Contents
