Advertisement
TO-221 / Instruction Manual
120-V Power Generator Package - Part No. 283782
2. Installation
A Specification 6914G ground power unit may be ordered from the factory with the 120-V AC power
generator package installed. Or, the power generator package may be purchased separately and
installed in the field on a machine previously purchased. Figure 2 shows where the power generator is
to be mounted on the ground power unit: on the right rear side of the mounting frame between the
wheels.
For installing the power generator package, it will be necessary to drill six holes in the right side of the
mounting frame
To install the power generator package, proceed according to the instructions provided on the following
pages of this manual.
May 15/92
Power Generator Package Location
Figure 2
Page 3
Advertisement
