Table of Contents
Advertisement
Automatic recovery ON
Your washer will try to automatically correct the out of balance load. It will fill with water
and agitate to redistribute the load before trying to spin up again.
To change the out of balance (OOB) recovery routine:
1
2
End of cycle beeps
The beeps signalling the end of the cycle can be increased or decreased. The default
setting is 5 beeps.
To modify the number of beeps sounding at the end of the cycle:
1
CHANGING PRE-SET OPTIONS
Wash Temp
OOB Recovery
EOC Beeps
Factory Reset
Wash Temp
OOB Recovery
EOC Beeps
Factory Reset
Enter Option Adjustment mode, refer to the
'Option Adjustment mode' for instructions.
Select the
DELICATE
Touch
or
MORE
LESS
decrease the number of beeps, or for no
beeps to sound at the end of the cycle.
Enter Option Adjustment mode, refer to the
'Option Adjustment mode' for instructions.
Select the
SHEETS
cycle.
to increase or
cycle.
35
Advertisement
Table of Contents
