Fisher & Paykel CLEANSMART WL8O60P Installation Manual page 32

Adjusting your options
1
2
Wash temperatures
All wash temperatures can be individually adjusted if you think they are too hot or too cold.
The hot temperature will be the same as the hot water supply temperature.
To modify the wash temperature:
1
32
CHANGING PRE-SET OPTIONS
Wash Temp
OOB Recovery
EOC Beeps
Factory Reset
Enter the Option Adjustment mode, refer to
'Option Adjustment mode' for instructions.
The diagram shows how the wash cycle icons
relate to the pre-set options you can change.
It also shows what will be displayed when
you first enter Option Adjustment mode.
Options you can change are accessible using
the ,
HEAVY DELICATE
cycles only.
Use the
DELAY START
to scroll through the available settings of
your selected option, eg to increase or
decrease the temperature of your warm wash
temperature, or to change the number of
beeps at the end of the cycle.
Enter the Option Adjustment mode, refer to
'Option Adjustment mode' for instructions.
Select the cycle.
HEAVY
, and
SHEETS EASY IRON
, on the panel
MORE