IOGear Combo ION GHE125C User Manual page 21

ION™ Drive Setup
Hi-Speed USB 2.0 Installation
Note: Before you begin, please make sure that the power to the device and your computer has been turned off.
For Windows® 98SE users, Insert the IOGEAR® Installation CD into your computer's CD-ROM tray before you
begin. (It is not necessary to install a driver under Windows® 2000, ME, XP or under any Mac OS) Please refer to
page 14 after completing the instructions on pages 12 and 13.
Step 1. Plug the USB Type mini-B connector into the back of the ION™ Drive.
Step 2. Plug the Power Adapter into the back of the ION™ Drive. (You must connect the power adapter in order to
utilize the drive.)
19