Table of Contents
Advertisement
Calder Brothers Corporation
Model: Precision Spray
GENERAL PRECAUTIONS
NOTE
Do NOT perform any maintenance or repair without prior authorization.
Allow only trained personnel to service the machine. In addition,
WARRANTY repairs can only be done by a CBC Dealer. They will know
what portions of the machine are covered under the terms of the CBC
warranty and what portions are covered by other vendor OEM warranties.
NOTE
Always dispose of waste lubricating oils, anti-freeze and hydraulic fluids
according to local regulations, or take them to a recycling center for disposal.
Do NOT pour them onto the ground or into a drain.
WARNING
Do NOT smoke or allow any open flames in the area while checking and/or
servicing hydraulic, battery or fuel systems. All contain highly flammable
liquids or explosive gases which can cause an explosion or fire if ignited.
Keep feet, clothing, hands, and hair away from moving parts. Wear appropriate
protective clothing, gloves, and shoes.
Wear a face shield when you disassemble spring loaded components or work with
battery acid. Wear a helmet or goggles with special lenses when you weld or cut
with a torch.
When working beneath a raised machine, always use blocks, jack-stands, or other
rigid and stable supports.
Always wear safety glasses or goggles to protect eyes from electric arcs from
shorts, fluids under pressure, and flying debris or loose material when the Engine
is running or when tools are used for grinding or pounding.
WORK AREA PRECAUTIONS
BEFORE starting inspection and repair, move the machine onto a clean, level
surface.
Make sure you have sufficient room, clearances, and adequate
ventilation. Shut down Engine, and release all hydraulic pressure.
Clean walking and working surfaces. Remove oil, grease, and water to eliminate
slippery areas.
servicing the machine.
ALWAYS lower the Moldboard and Tool Bar to full ground contact. Place all
controls in neutral. Block the Wheels.
Serial #
944-N-P2C---S-D00000 to Current
Use sand or oil-absorbing compound, as necessary, while
Page57
V2.2
Advertisement
Table of Contents
