Table of Contents
Advertisement
Calder Brothers Corporation
Model: Precision Spray
b.
Do not overfill.
c.
DO NOT SMOKE.
VIII. Distributor and Chassis General Safety
a.
The operator shall be responsible for the pre-trip of the chassis as well as
checking the following functions.
i.
b.
Operator shall ensure that the machine is properly stored at the enc of each
day in a safe secure location.
c.
Operator shall ensure that all safety decals and placards are clean and in
the proper location.
d.
Certified parts shall be used in replacement or maintenance.
The above Safety Alert Symbol means ATTENTION! BECOME ALERT! YOUR
SAFETY IS INVOLVED! It stresses an attitude of "Heads Up for Safety" and can be
found throughout this Operator's Manual and on the machine itself.
BEFORE YOU OPERATE THIS EQUIPMENT, READ AND STUDY THE
FOLLOWING SAFETY INFORMATION. IN ADDITION, MAKE SURE THAT
EVERY INDIVIDUAL WHO OPERATES OR WORKS WITH THIS EQUIPMENT,
WHETHER FAMILY MEMBER OR EMPLOYEE, IS FAMILIAR WITH THESE
SAFETY PRECAUTIONS.
Serial #
944-N-P2C---S-D00000 to Current
Hydraulic system safety.
1.
Components in proper working condition.
2.
Hoses properly routed and free of leaks and chafing.
3.
Obeying all DOT, State, County, and Municipal regulations
concerning the machine.
4.
Visual inspection of lights on distributor as well as chassis.
5.
Ensuring the spray-bar is in proper position for transport.
General Safety Instructions
DANGER
"Danger" indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING
"Warning" indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.
CAUTION
"Caution" indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury. May also alert against unsafe practices.
Page5
V2.2
Advertisement
Table of Contents
