Scan Operation; Scan Types - Icom IC-R2 Instruction Manual

Scan types

FULL SCAN (p. 16)
495 1309.995
kHz MHz
Scan
Jump
PROGRAMMED SCAN
(p. 16)
Band Band
Scan edges
edge edge
Scan
Jump
FREQUENCY SKIP
FUNCTION (p. 19)
Band edge or Band edge or
scan edge scan edge
Scan
Skip Skip
Jump
Repeatedly scans all fre-
quencies over the entire
receiver range.
U.S.A. version cannot
receive some frequencies.
Repeatedly scans between
two user-programmed fre-
quencies. Used for checking
for frequencies within a
specified range such as
repeater output frequencies,
etc.
Skips unwanted frequen-
cies that inconveniently
stop scanning. This func-
tion can be turned ON and
OFF in frequency skip func-
tion set mode. ([FUNC] +
[ SKIP])
(TS)

SCAN OPERATION

Up to 25 programmed scan ranges, full scan, band scan and
memory bank scan provide scanning versatility. Each scan
can have skip channels programmed.
SELECTED BAND SCAN
(p. 16)
Band Band
edge edge
Scan
Jump
MEMORY (BANK) SCAN
(p. 16)
Not yet
programmed
ch 1 ch 2 ch 3
ch 0
ch 4
SKIP
ch 49 ch 6
ch 5
MEMORY SKIP FUNCTION
(p. 18)
Not yet
programmed
ch 1 ch 2 ch 3
ch 0
ch 4
ch 49 ch 6
ch 5
6
Repeatedly scans all fre-
quencies over the entire
selected band.
Repeatedly scans memory
channels except skip chan-
nels within all programmed
channels or within a memo-
ry bank (0–7).
Skips unwanted memory
channels that inconvenient-
ly stop scanning. Skip
channels can be toggled
ON and OFF by pushing
[FUNC] + [ SKIP] in
(TS)
memory mode.
15