Table of Contents
Advertisement
9
SET MODE
D D VSC setting
Turns VSC (Voice Squelch Control) function ON and OFF.
D D Scan resume timer
Selects scan resume timer from SCT-15 (default), SCT-10,
SCT-5 and SCP-2. Scan resumes after the specified period
when the received signal disappears.
• SCT-15/10/5
: Scan pauses for 15/10/5 sec. when the
• SCP-2
: Scan pauses on a signal until signal dis-
39
(default: OFF)
received signal disappears.
appears, then resumes 2 sec. after the
signal disappears.
D D Program scan skip setting
Sets the program scan skip setting ON and OFF for VFO
scan operation, such as programmed scan.
This item appears when set mode is accessed from VFO
mode only.
D D Scan skip area setting
Sets the pre-programmed scan skip area setting ON and OFF
for VFO scan operation, such as programmed scan.
This item appears only when the scan skip area setting is pro-
grammed by the clone ((p. 44)) and set mode is accessed
from VFO mode.
D D Memory name setting
Sets memory name setting from ON (appear) and OFF (not
appear; default) for memory name appearance.
This item appears when set mode is accessed from memory
mode only.
(default: ON)
Advertisement
Table of Contents
