Table of Contents
Advertisement
9
SET MODE
D D Display contrast
The LCD contrast can be adjusted through 9 levels.
D D Duplex direction
Sets the duplex direction. The displaying frequency shifts the
programmed offset frequency (below) when monitor function
is in use (pushing [MONI•T/T-SCAN]).
• OFF : Simplex operation. (default)
• DUP– : The displaying frequency shifts down during
monitor.
• DUP+ : The displaying frequency shifts up during moni-
tor.
37
D D Offset frequency
Sets the duplex offset frequency for each frequency band in-
(default: 5)
dependently within 0 to 1000 MHz range. During duplex op-
eration (DUP– or DUP+), the monitoring frequency (pushing
[MONI•T/T-SCAN]) shifts the set frequency.
The default value may differ according to the selected fre-
quency band
The selected tuning step in VFO mode is used for setting
the offset frequency.
and receiver version.
(before accessing set mode)
Advertisement
Table of Contents
