Table of Contents
Advertisement
2
SYSTEM SETUP
D D DNS function verification
q Start up "Terminal" with the following mouse oper-
ation.
w The local DNS operation can be verified by enter-
ing the following command.
# dig router.dstar.local
I Gateway control software
D D Installation
q Insert the RS-RP2C CD into the drive.
w Expands the file into the "/dstar" directory using
with the following command, or double-click the file
during the CD content is displayed.
Command: # tar zxvf dstar-xxxx.tar.gz
(XXXX=revision number)
D D Syslog setting
For your convenience:
Set the syslog if desired.
By setting the syslog, easy log management is pro-
vided because of the independent log.
D D Starting up the control software
Execute script "/dstar/exec-mgsv" when starting up
the gateway control software.
When starting up the control software and the system
at the same time, add the command as above in the
"/etc/rc.d/rc.local."
And we recommend to set the server condition as de-
scribed at right above to improve the gateway server
performance.
e When the correct router IP address "10.0.0.1" is
displayed in the answer section as below, the GW
setup is succeeded.
x Select
z Click
c Click
e Copy the both "dsgwd.conf" and "dsipsvd.conf"
files, expanded in the "/dstar/conf" directory, into
the "/etc" directory.
r Open the copied files, then edit the contents to
suits the network.
• See page 8 and 9 for details.
➥ Add the following contents in "etc/syslog.conf."
# for D-STAR
local0.*
local2.*
• Deactivate all the services except below
anacron, apmd, atd, crond, keytable, named,
network, ntpd, random, sshd, syslog, xinetd
• Do not start up the X-Window System when
starting up the gateway server
Change the "Default runlevel" in "/etc/inittab" from
5 to 3.
*The X-Window System start up manually with the
"startx" command.
6
Enter the command
Router IP address
/var/log/dsgwd.log
/var/log/dsipsvd.log
Advertisement
Table of Contents
