I Ip Server Operation; D Command Operation - Icom RS-RP2C Setup Instructions

2
SYSTEM SETUP

I IP server operation

D D Command operation
Sets the command input and output using with the
"FIFO" (/tmp/dsipsvd-cmdin, /tmp/dsipsvd-cmdout).
q Start up 2 Terminals, Terminal-1 and Terminal-2
with the following mouse operation.
• Format
Mark
Y Y
Space
(ASCII code: 0x20)
| Vertical line
[CS(T/A/Z)] 8-character call sign
When the entered call sign does not fulfil 8-character, fill using a space.
[DB] Enter one of "GIP," "RIP" or "MNG."
[GWIP] Enter the global IP address of the gateway divided by full stop (.).
[TIP] Enter the local IP address of the target server divided by full stop (.).
[HNAME] Enter the target HOST name that is used for DNS.
Usable characters: A-Z, a-z, 0-9, _, /, [, ], +
[FNAME] Enter the file name that is specified by the absolute path.
x Select
z Click
c Click
(ASCII code: 0x7c)
(T: Target, A: Area repeater, Z: Zone repeater)
(Capital letters only)
w Enter the following command in the Terminal-1 to
make an output terminal of the "FIFO."
#cat /tmp/dsipsvd-cmdout
Description
10
Command
(ASCII code: 0x20)