I Linux Os Installation; I Dns Name Server Installation - Icom RS-RP2C Setup Instructions

1
PREPARATION
I Linux
® OS installation
Refer to the appropriate distributor's home page about
the details of the OS installation.
See the addresses listed below for your information.
✔ For your information
• Fedora Core 2
http://fedoraproject.org/
http://fedora.redhat.com/
• RedHat Linux 9
® ®
- OS down load site
http://ftp.redhat.com/pub/redhat/linux/9/en/iso/i386/
- ISO images necessary
shrike-i386-disc1.iso, shrike-i386-disc2.iso, shrike-i386-disc3.iso
- Installation description
http://www.redhat.com/docs/manuals/linux/RHL-9-Manual
• Fedora Legacy Project
http://www.fedoralegacy.org/

I DNS name server installation

Install the DNS name server if not installed.
q Open "Add/Remove Applications" with the follow-
ing mouse operation.
w Click "DNS name Server" to add a check mark,
"✔," and then click "Details."
Click to add "✔."
After the installation, update the OS.
Any support from RedHat has already been finished,
however, the update package is supplied from Fedora
legacy Project.
(*The following addresses may delete or change without notice.)
e Click
to apply check mark, "✔," at "caching-nameserver."
• Click [× Close] after the setting.
c Click
x Select
z Click
r Click [Update] to start the installation.
Click
2
"≈ ≈ " mark beside "Extra Packages" then click
x Click to add "✔."
z Click
c Click
Click