Basic Operation ................................................ 5; I Dial Select Function - Icom IC-A4 Instruction Manual

I Dial select function

Use the dial select function to adjust the tuning behavior of
the [Y]/[Z] keys—use 1 MHz tuning when you want to
change the frequency in large increments; use regular tuning
when you want to change the frequency in smaller incre-
ments.
q Push [V/M] to select VFO
mode.
w Push [V/M] for 2 sec. one or
more times to select the de-
sired tuning increment.
- 1 MHz tuning, 100 kHz tun-
ing or regular tuning steps
can be selected. (see dia-
grams at right)
e Push any key to return to nor-
mal operation.
NOTE: Large tuning steps should be used only when you
want to change the frequency in large increments please se-
lect regular tuning steps for normal operation.
1 MHz tuning selected
100 kHz tuning selected
Regular tuning selected
3
BASIC OPERATION
7