IBM 1U Installation And Maintenance Manual page 52

42
1U 17-inch Flat Panel Console Kit: Installation and Maintenance Guide
2. Remove the plastic split bushing from the cable-routing cutout in the console
unit frame:
a. Gently squeeze the bushing and push it toward the rear of the console unit
to remove it.
Note: In the following illustration, the console unit is turned over and is
placed on a table or other flat surface.
b. Remove the keyboard-and-mouse cable from the bushing.
c. Save the bushing for use later in this procedure.
3. Turn over the console unit:
a. Grasp the cable-management arm and the loose cables in one hand.
b. On the opposite end of the console unit, grasp the flat-panel display and
the console unit frame together with the other hand.
c. Carefully turn over the console unit.