IBM 1U Installation And Maintenance Manual page 38

28
1U 17-inch Flat Panel Console Kit: Installation and Maintenance Guide
5. Remove the plastic split bushing from the cable-routing cutout in the console
unit frame:
a. On the underside of the console unit, gently squeeze the bushing and push
it toward the rear of the console unit to remove it.
Note: The following illustration shows the underside of a fully extended
console unit that is installed in a rack.
b. Remove the keyboard-and-mouse cable from the bushing.
c. Save the bushing for use later in this procedure.
6. Carefully lift the flat-panel display to the full upright position.
7. Remove the keyboard and cable from the console unit.