Maintenance Instructions; Moving And Storage Instructions - Schumacher FR01240 Owner's Manual

FOR MODELS WITH AN AIR COMPRESSOR
5.5
WARNING. Read the instructions of the product being inflated before using the compressor. Avoid
overinflation; do not exceed the manufacturer's recommended pressures. Do not leave the air
compressor unattended during use.
NOTE: Wrap cleats are provided for convenient storage of the air compressor hose. Wrap the hose
around these cleats when the hose is not in use.
1. Ensure the battery clips are securely on the storage holders.
2. Remove the air compressor hose from the storage cleats.
3. Connect the adapter to the valve stem by threading it onto the end. If necessary, use one of the
additional adaptors.
4. Press the air compressor power switch to turn ON and inflate to the desired pressure or fullness (refer
to the gauge next to the switch).
5. When the desired pressure is reached, press the air compressor power switch to turn OFF and remove
the connector from the valve stem.
6. Allow unit to cool.
7. Recharge the unit before storing.
NOTE: The air compressor is rated for 150 PSI.
Estimated time for inflating
Vehicle tires 13-16"
Bike tires
Sports balls
These times are approximate. Use the air compressor gauge
to ensure the proper pressure has been reached. Do not overinflate.
6.

MAINTENANCE INSTRUCTIONS

After use and before performing maintenance, unplug and disconnect the jump starter.
6.1
Use a dry cloth to wipe all battery corrosion and other dirt or oil from the battery clips, cords and the
6.2
jump starter case.
Ensure that all of the jump starter components are in place and in good working condition.
6.3
All servicing should be performed by qualified service personnel.
6.4
7.

MOVING AND STORAGE INSTRUCTIONS

Store inside, in a cool, dry place.
7.1
Do not store the clips on the handle, clipped together, on or around metal, or clipped to cables. The clips
7.2
on the jump starter are live when the switch is in the ON position and will produce arcing or sparking if
they come in contact with each other. To prevent accidental arcing, always place the switch in the OFF
position and keep the clips on the storage holders when not using it to jump start a vehicle.
If the jump starter is moved around the shop or transported to another location, take care to avoid/
7.3
prevent damage to the cords, clips and jump starter. Failure to do so could result in personal injury or
property damage.
IMPORTANT: Do not use and/or store the jump starter in or on any area or surface where damage
could occur if the internal battery should unexpectedly leak acid.
6-24 minutes
1-3 minutes
30 seconds
• 5 •