Table of Contents
Advertisement
4-2. Functions of the "Administrator Settings" Menu
Function
Auto Input Detection
Compatibility Mode
USB-C Display Mode Normal
Setting Range
On
This function automatically recognizes the connector through
Off
which PC signals are input, and displays images on the screen
accordingly.
• "On"
When the monitor is connected to multiple PCs, if a specific
PC enters power saving mode or no signals are input to the
monitor, the connector is automatically changed to another
one to which signals are input.
• "Off"
This function displays the signal from the selected connector
regardless of whether a signal is input or not. In this case,
you can select the input signal to display using the
operation switch on the front of the monitor. For details, see
"2-2. Switching Input Signals" (page
Note
• This function is not available during PbyP display.
• This product automatically recognizes the connector through
which PC signals are input, and displays images on the
screen accordingly regardless of whether this function is set
to On or Off just after the main power switch on the rear side
of the monitor has been turned on.
• When this function is set to "On", the monitor only enters
power saving mode after all connected PCs have entered
power saving mode or have been switched off.
On
If you want to avoid the following phenomena, set this function to
Off
"On".
• The positions of windows and icons are shifted when the
monitor is turned off / on or has returned from the power
saving mode.
• Power Save function of the PC does not work normally.
• During USB-C input, the screen blinks two or three times
immediately after the USB cable has been connected or the
PC has returned from the Power Save mode.
• When the power to the monitor is turned off, a device
connected to the USB downstream port does not work.
If no image appears on the monitor screen even when a device
Extra
compatible with DP Alt Mode is connected to the USB-C
connector of the monitor, set this function to "Extra".
Description
14).
Chapter 4 Administrator Settings
27
Advertisement
Table of Contents
