Lenovo 3000 Y100 User Manual page 30

Lenovo Portable Computer User Manual
Hibernation mode is suspending the system hard disk (STD). It is a very
useful facility. It saves all the data of memory and video memory to the
hard disk. The next time to turn on the computer, the pervious state will
restore. If you are using Microsoft Windows XP or Windows 2000
operating system, you only need to enable this facility through Start ->
Control Panel -> Performance and Maintenance -> Power Options ->
Hibernate.
Under hibernation mode, the system data will save to hard disk and shut
down the computer to save the power consumption. After the computer
enter hibernation mode, you can press the power button to wake up the
computer and restore the previous state. If you enable hibernation facility,
when the computer battery is extremely low, the computer will enter the
hibernation mode automatically by default setting.
You can set up the way of entering hibernation mode for your computer:
"close the lid of portable computer", "press the power button", or
"press the computer sleep button".
To enable hibernation facility, Click Start -> Control Panel ->
Performance and Maintenance -> Power Options -> Hibernation,
choose "Enable Hibernation", click "Apply".
Hint: If the PC card does not work properly after the system
restore from hibernation mode, please remove and re-install
the card and restart the computer.
To quit the hibernation mode, please press the power button. Press the
keyboard key and touch pad can not quit the hibernation mode.
2.1.6 Set up low power protection:
Note: If you do not save your data in time before the battery
30