Lenovo 3000 Y100 User Manual page 18

Lenovo Portable Computer User Manual
When you are closing the display panel, hold the middle-top side and lay
down the panel slowly with your both hand until the LCD display panel is
close with the main frame and the display latch is restored again.
1.2.2 Starting up for the first time
Since the battery is uncharged, when you first time turn on the computer,
you have to connect the AC adaptor to your computer.
Note: If there's no external power source connected and the
computer uses battery only, it is possible you cannot power
on the system because of its low battery, and then you need
to plug an AC adapter for power supply.
Note: Please use the power cord and AC adaptor which come
with the computer. If one of them is damaged, do not use
them and contact our service centre for help.
CAUTION: Use the wrong AC adaptor may damage your
computer.
Instruction of connecting the AC adaptor and turning on the computer:
1. Place the computer on a flat and clean surface;
2. Connect the power cord to the computer;
3. Connect the AC adaptor's DC output plug to the computer's DC IN
socket;
4. Plug the power cord into a live power source which supports the
voltage from 100 to 240volts and the frequency of either 50 or 60 hertz.
5. Open the display panel to the right angle and press the power button
to turn on the computer.
18