DD*C MODELS:
If sanitization has been successful:
The dishwasher will beep
●
0
will show in the display
●
The sanitize indicator will remain lit.
●
After 30 seconds the display will turn off.
●
If sanitization has not been successful:
An alert will sound
●
An alert code will show in the display
●
The sanitize indicator will not be lit.
●
Check if the water supply has been turned
●
off or the wash program interrupted.
Press
once to stop the beeping and
●
then again to clear the alert code, then run
the sanitize cycle again.
See also section 'How to attend to a fault'.
DD*D AND DD*I MODELS:
If sanitization has been successful:
The wash will finish as normal.
●
If sanitization has not been successful:
An alert will sound
●
When the drawer is opened the sanitize indicator will flash.
●
Check if the water supply has been turned off or the wash program interrupted.
●
Press and hold
●
code.
Reset sanitize and then run the cycle again.
●
See also section 'How to attend to a fault'
●
WASH MODIFIERS
once to stop the beeping and a second time to clear the flashing alert
(SOME MODELS ONLY)
13