Island trim and backguard
It is mandatory to install and use the appliance with either
●
the island trim or the optional backguard correctly in place.
The island trim is already fitted to the appliance while the
●
backguard can be purchased as a separate kit.
If replacing the island trim with the backguard, assemble it
●
by using the same screws/spacers used for fixing the island
trim.
Grounded outlet
The electric cord with 4-prong ground plug
●
(NEMA 14-50P) shall have a minimum length
of 48" (1220mm) beyond the back of the
range.
8
8
FITTING THE OPTIONAL BACKGUARD
12 x
Fig. 1.3b
9
LOCATION OF ELECTRICAL SUPPLY
A
B
Fig. 1.3a
Left side
Final position of cooker against wall
of cavity
Floor
A
SUPPLY AREA DIMENSIONS
D
A
Distance from either edge of
Range to supply area
B
Height of electrical supply area
(from floor)
C
Width of electrical supply areas
D
Depth of supply area (ie
maximum protrusion of electrical
connection from wall)
*
Depending on adjustment of feet
A
12 x
B
B
Electricity
C
A
inches (mm)
3/16" (5)
2 3/16" - 4 1/8" * (55-105)*
29 1/2" (749)
3 15/16" (100)