Rear - Eizo ColorEdge CS2731-BK User Manual

●

Rear

3. Transportation handle
4. Lock button
5. USB Type-A connector
(USB downstream port)
6. Security lock slot
*1
7. Stand
8. Cable holder
9. Main power switch
10. Power connector
11. DVI connector
12. HDMI connector
13. DisplayPort connector
14. USB Type-C connector
(USB upstream port)
15. USB Type-B connector
(USB upstream port)
16. USB Type-A connector
(USB downstream port)
*1 An optional arm (or an optional stand) can be attached by removing the stand section (refer to
Attaching the Optional Arm" (page
8
Chapter 1 Introduction
4
6
9 10
This handle is used for transportation.
Attention
• Firmly grasp and hold the monitor by the bottom while grabbing the
handle, and carefully convey the monitor so as not to drop it.
Use this button when removing the stand from the monitor.
Connects to a peripheral USB device. Supports USB 3.1 Gen 1. This is
a blue-colored connector.
Complies with Kensington's MicroSaver security system.
Adjusts the height and angle (tilt and swivel) of the monitor.
Covers the monitor cables. For details on attaching the cable holder, see
"7-3. Attaching/Detaching the Cable Holder" (page
Turns the main power on or off. : On,
Connects the power cord.
Connects to an external device that has DVI output.
Connects to an external device that has HDMI output.
Connects to an external device that has DisplayPort output.
Connects a device that supports USB Type-C.
Connects to the USB cable when using software that requires a USB
connection, or when using the USB Hub function. This is a blue-colored
connector.
Connects to a peripheral USB device. Supports USB 2.0.
39)).
3
7
8
11 12 13
: Off
5
14 15 16
40).
"7-2.