Table of Contents
Advertisement
To clean the door lint filter:
1
2
Cleaning the condenser filter, foam and evaporator grid
To maintain optimum performance of your dryer the condenser filter, foam and evaporator
grid must be cleaned.
30
CARING FOR YOUR DRYER
Open the dryer door.
Remove the lint filter by pulling it up and out
of the filter slot.
Open it out and wipe the surfaces clean with
your hand or a soft cloth.
Close the lint filter and place it back in the
opening. Ensure the filter is fitted correctly
back in place before operating the dryer.
Condenser filter
The condenser filter is located below the
door on the left-hand side.
Evaporator grid
The evaporator grid is located behind the
condenser filter.
Advertisement
Table of Contents
