Wheels - Yamaha XT250M 1999 Owner's Manual

Tire inspection
Always check the tires before oper-
ating the motorcycle. If a tire tread
shows crosswise lines (minimum
tread depth), if the tire has a nail or
glass fragments in it, or if the side
wall is cracked, contact a Yamaha
dealer immediately and have the
tire replaced.
FRONT
Manufacturer Size
BRIDGESTONE 2.75-21 4PR TRAIL WING-27
CHENG SHIN 2.75-21 4PR
REAR
Manufacturer Size
BRIDGESTONE 120/80-18 62P TRAIL WING-30
CHENG SHIN 120/80-18 62P
Minimum tire tread
depth (front and rear)
PERIODIC MAINTENANCE AND MINOR REPAIR
w
8 It is dangerous to ride with a
worn-out tire. When a tire
tread begins to show lines,
have a Yamaha dealer replace
the tire immediately. Brakes,
tires, and related wheel parts
replacement should also be
left to a Yamaha dealer.
8 Patching a punctured tube is
not recommended. If it is
Type
absolutely necessary to do so,
use great care and replace the
C-6006
tube as soon as possible with
a good quality replacement.
Type
C-6006
1.0 mm
EAU00680

Wheels

To ensure maximum performance,
long service, and safe operation,
note the following:
6-16
8 Always inspect the wheels
before a ride. Check for cracks,
bends or warpage
wheel. Be sure the spokes are
tight and undamaged. If any
abnormal condition exists in a
wheel, consult a Yamaha deal-
er. Do not attempt even small
repairs to the wheel. If a wheel
is deformed or cracked, it must
be replaced.
8 Tires and wheels should be
balanced whenever either one
is changed or replaced. Failure
to have a wheel balanced can
result in poor performance,
adverse handling characteris-
tics, and shortened tire life.
EAU00685
1
2
of the
3
4
5
6
7
8
9