Removing The Manual Starter; Disassembling The Manual Starter; Checking The Manual Starter - Yamaha F4B Service Manual

POWR

Removing the manual starter

1. Disconnect the start-in-gear protection
cable a.
2. Remove the manual starter b.

Disassembling the manual starter

1. Align the protrusion a on the starter
plunger a and the mark b on the man-
ual starter b.
2. While holding the starter rope c, turn the
sheave dram d 3–4 turns clockwise.
c
b
d
3. Remove the drive plate e, drive pawls
f, and drive pawl springs g, and then
remove the clip h from the drive plate e.
7-7
Power unit
a
b
a
a
b
e
h
f
f
g
4. Remove the sheave drum d and plate
i.
i
5. Remove the spiral spring j. WARNING!
The spiral spring can pop out. Cover
the spiral spring with rags when
removing it.
j
6. Remove the starter rope c, E-clip k,
starter plunger a, starter plunger spring
l, and guide m.
c

Checking the manual starter

1. Check the guide, drive pawls, drive plate,
plate, and starter plunger. Replace if
cracked or damaged.
2. Check the clip, drive pawl springs, E-clip,
g
and starter plunger spring. Replace if
bent, cracked, or damaged.
d
m
a
l
k