Bracket Unit; Tiller Handle; Disassembling The Tiller Handle; Assembling The Tiller Handle - Yamaha F4B Service Manual

BRKT

Disassembling the tiller handle

1. Remove the holders a, b, and c.
c
b
a
2. Remove the plate d and tiller handle
assembly e.
d
3. Remove the bushings f, g, washers h,
i, and wave washer j, and then
remove the bushing k.
f
h
4. Remove the throttle grip l, washers m,
spring n, and bushing o.
9-3

Bracket unit

e
k
i
g
j
5. Remove the cotter pin p and throttle
friction adjuster q.
m
o
n
l
6. Remove the plate r, friction piece s,
throttle cables t, and throttle rod u.
t
s

Assembling the tiller handle

1. Pass the throttle cables a through the
holes in the tiller handle b.
a
2. Install the cable into the throttle rod c.
p
q
u
r
b
a