Advertisement
Assembly
3.
Tighten the screws in this order: q slant stays, w
pedal stays.
4.
Set the main unit upside down.
To prevent damage to the floor and the main unit, leave the
main unit in the shipping package, or place a rug or soft
cloth on the floor underneath the main unit.
5.
Turn the leg assembly upside down, put it on the
main unit, and then secure it with the four screws.
NOTE
If the direction of legs and main unit is not correct, the location of
pins and holes may be misaligned, and may not be assembled
properly.
Be careful not to pinch
your fingers!
CAUTION
6 • YV3030MS Owner's Manual
6.
To prevent the pedal from moving uncontrollably,
secure the damper by hooking the damper belt tip
to the hook of the main unit.
Damper belt
7.
Stand the instrument upright while being careful
to avoid overturning or falling of instrument.
8.
Lock the casters by pressing the stoppers on the
left and right casters.
9.
Lower the damper pedal.
Unbuckle the damper belt to avoid excessive tension to the
belt when raising the position of the instrument height in
step 11.
Advertisement
